Die Cutting Machinery
Shan Tsae Belt Cutting NTK Series
Specs:
Specs:
| NTK100H | |
|---|---|
Features |
Belt cutting length is precisely controlled by numerical controller of the micro-computer. Operation is simple. Low waste rate saves material. |
Material |
Heat shrinkage sleeve, flat cable, PVC sleeve, insulating paper, two-sided tape,Velcro belt, etc… |
Cutting Width |
MAX:100mm |
Cutting Length |
MAX:9999.9mm |
Cutting Method |
Cold cut and half-cut |
Voltage / Power |
110V or 220V, 3/4HP |
N.W / G.W |
58kg / 66kg |
Dimensions |
600 X 600 X 600mm |
| NTK100AH | |
|---|---|
Features |
Belt cutting length is precisely controlled by numerical controller of the micro-computer. Cutting knife is with heating elements. The cut edge of the braided belt is smooth without burrs. Trimming is unnecessary. Low waste rate saves material. |
Material |
Color belt, nylon belt, braided belt. etc… |
Cutting Width |
MAX:100mm |
Cutting Length |
MAX:9999.9mm |
Cutting Method |
Cold cut and half-cut |
Voltage / Power |
110V or 220V, 3/4HP |
N.W / G.W |
58kg / 66kg |
Dimensions |
600 X 600 X 600mm |
| NTK160 | |
|---|---|
Features |
Belt cutting length is precisely controlled by numerical controller of the micro-computer. Operation is simple. Low waste rate saves material. |
Material |
Heat shrinkage sleeve, cable wire, PVC sleeve, insulating paper, two-sided tape, Velcro belt, etc… |
Cutting Width |
MAX:160mm |
Cutting Length |
MAX:9999.9mm |
Cutting Method |
Cold cut and half-cut |
Voltage / Power |
110V or 220V, 3/4HP |
N.W / G.W |
90kg / 120kg |
Dimensions |
650 X 650 X 1250mm |
| NTK160A | |
|---|---|
Features |
Belt cutting length is precisely controlled by numerical controller of the micro-computer. Cutting knife is with heating elements. The cut edge of the braided belt is smooth without burrs. Trimming is unnecessary. Low waste rate saves material. |
Material |
Color belt, nylon belt, braided belt, etc… |
Cutting Width |
MAX:160mm |
Cutting Length |
MAX:9999.9mm |
Cutting Method |
Cold cut and half-cut |
Voltage / Power |
110V or 220V, 3/4HP |
N.W / G.W |
90kg / 120kg |
Dimensions |
650 X 650 X 1250mm |
| NTK098 | |
|---|---|
Features |
Belt cutting length is precisely controlled by numerical controller of the micro-computer. Operation is simple. Low waste rate saves material. |
Material |
Heat shrinkage sleeve, flat cable, PVC sleeve, insulating paper, two-sided tape,Velcro belt, etc… |
Cutting Width |
MAX:98mm |
Cutting Length |
MAX:9999.9mm |
Cutting Method |
Cold cut (straight cut) |
Voltage / Power |
110V or 220V, 3/4HP |
N.W / G.W |
30kg / 35kg |
Dimensions |
600 X 450 X 400mm |
| NTK098V | |
|---|---|
Features |
Belt cutting length is precisely controlled by numerical controller of the micro-computer. Operation is simple. Low waste rate saves material.3 knife molds with 3 corrner sizes (1", 3/4" and 1/2"). |
Material |
Heat shrinkage sleeve, flat cable, PVC sleeve, insulating paper, two-sided tape,Velcro belt, etc… |
Cutting Width |
MAX:98mm |
Cutting Length |
MAX:9999.9mm |
Cutting Method |
Cold cut (straight cutting or knife mold cutting) |
Voltage / Power |
110V or 220V |
N.W / G.W |
30kg / 35kg |
Dimensions |
600 X 450 X 400mm |
| NTK098mh | |
|---|---|
Features |
Belt cutting length is precisely controlled by numerical controller of the micro-computer. Operation is simple. Low waste rate saves material. Hot knife rims the cutting edge. No burrs will occur.Being incorporated with photoelectric alignment, the machine can be used to cut woven label at designated points. |
Material |
Label |
Cutting Width |
MAX:98mm |
Cutting Length |
MAX:9999.9mm |
Cutting Method |
Hot cut (standard mode and sensor mode) |
Voltage / Power |
110V or 220V |
N.W / G.W |
30kg / 35kg |
Dimensions |
600 X 450 X 400mm |